Genst Controller DC30D for Small Diesel Gasoline Generator Start Stop Monitor

Description

Summary
This Controller Series is specialized for small diesel, gasoline, gas generator sets’start, stop,monitor and defaults checking as well as parameters setting.
The controller has a point array LCD screen, can display various faults in the same time that the genset will be stopped once it can not work smoothly.
There are Chinese/English interface options, more language can be set according to user’s request. All the parameters can be configured through the front face buttons or use programmable interface by USB to adjust via
PC. It can be widely applied for all kinds of auto control system of gensets.
Main Features
32 units Micro-procession technology is used.
1.8 inches 128*64 LCD display with backlight, option language interface (Chinese/English), user’s language set if necessary.
PC front face panel, which is water-proof, oil-proof, UV proof so that the durability is longer.
USB Port: parameters can be set even without power.
All the parameters can be set through front panel buttons.
Collect and display a variety of engine and generator parameters.
Records function: relative faults shall be recorded in real time.
It has 5 relay outputs, 3 of which are configurable, and more than 10 functions can be selected for each channel.
1 switch value input, and each can be set as max 20 functions.
3 sensor simulation input connectors, various kinds of units can be set.
Sensor can be self-defined by front face button or PC software.
Various of crank conditions(RPM,Frequency, Oil Pressure) can be chosen.
Control Protection:Auto Start/Stop of genset,load transfer and perfect failure display and protection.Standard water-proof rubber gasket. The waterproof can reach IP54.
Module design: All the connections are adapted with European connectors so that installation, connection, repair and replacement can be more easily.
Parameters Display
Engine RPM
Engine oil pressure
Engine temperature
Engine fuel level
Engine battery voltage
Generator voltage L-N
Generator current A
Generator Frequency Hz
Generator active power KW
Successful start Times
Current running time
Total running time
Classes maintenance notice
Protection
Over speed
Under speed
Low oil pressure
High temperature
Low fuel level
External emergency alarm
Sensor Open
Over Frequency
Under Frequency
Over voltage
Under voltage
Over current
Maintenance expire
Low water level alarm
Emergency Stop
Crank failure
Stop Failure
Over battery voltage
Under Battery voltage
Typical Wiring Diagram
Note: Please don’t move battery during running status or it may cause the controller broken!
WARNING: When generator is on-load, C. T. secondary must not be open circuit, Otherwise, the high voltage generated will pose a danger to personal safety.
Package include:
1 x DC30 Genset controller
1 x User manual in English
2 x Screw